import _plotly_utils.basevalidators class VolumeValidator(_plotly_utils.basevalidators.CompoundValidator): def __init__(self, plotly_name="volume", parent_name="", **kwargs): super(VolumeValidator, self).__init__( plotly_name=plotly_name, parent_name=parent_name, data_class_str=kwargs.pop("data_class_str", "Volume"), data_docs=kwargs.pop( "data_docs", """ autocolorscale Determines whether the colorscale is a default palette (`autocolorscale: true`) or the palette determined by `colorscale`. In case `colorscale` is unspecified or `autocolorscale` is true, the default palette will be chosen according to whether numbers in the `color` array are all positive, all negative or mixed. caps :class:`plotly.graph_objects.volume.Caps` instance or dict with compatible properties cauto Determines whether or not the color domain is computed with respect to the input data (here `value`) or the bounds set in `cmin` and `cmax` Defaults to `false` when `cmin` and `cmax` are set by the user. cmax Sets the upper bound of the color domain. Value should have the same units as `value` and if set, `cmin` must be set as well. cmid Sets the mid-point of the color domain by scaling `cmin` and/or `cmax` to be equidistant to this point. Value should have the same units as `value`. Has no effect when `cauto` is `false`. cmin Sets the lower bound of the color domain. Value should have the same units as `value` and if set, `cmax` must be set as well. coloraxis Sets a reference to a shared color axis. References to these shared color axes are "coloraxis", "coloraxis2", "coloraxis3", etc. Settings for these shared color axes are set in the layout, under `layout.coloraxis`, `layout.coloraxis2`, etc. Note that multiple color scales can be linked to the same color axis. colorbar :class:`plotly.graph_objects.volume.ColorBar` instance or dict with compatible properties colorscale Sets the colorscale. The colorscale must be an array containing arrays mapping a normalized value to an rgb, rgba, hex, hsl, hsv, or named color string. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 'rgb(0,0,255)'], [1, 'rgb(255,0,0)']]`. To control the bounds of the colorscale in color space, use `cmin` and `cmax`. Alternatively, `colorscale` may be a palette name string of the following list: Blac kbody,Bluered,Blues,Cividis,Earth,Electric,Gree ns,Greys,Hot,Jet,Picnic,Portland,Rainbow,RdBu,R eds,Viridis,YlGnBu,YlOrRd. contour :class:`plotly.graph_objects.volume.Contour` instance or dict with compatible properties customdata Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements customdatasrc Sets the source reference on Chart Studio Cloud for `customdata`. flatshading Determines whether or not normal smoothing is applied to the meshes, creating meshes with an angular, low-poly look via flat reflections. hoverinfo Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. hoverinfosrc Sets the source reference on Chart Studio Cloud for `hoverinfo`. hoverlabel :class:`plotly.graph_objects.volume.Hoverlabel` instance or dict with compatible properties hovertemplate Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3- format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time- format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs- events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. hovertemplatesrc Sets the source reference on Chart Studio Cloud for `hovertemplate`. hovertext Same as `text`. hovertextsrc Sets the source reference on Chart Studio Cloud for `hovertext`. ids Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. idssrc Sets the source reference on Chart Studio Cloud for `ids`. isomax Sets the maximum boundary for iso-surface plot. isomin Sets the minimum boundary for iso-surface plot. legend Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. legendgroup Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. legendgrouptitle :class:`plotly.graph_objects.volume.Legendgroup title` instance or dict with compatible properties legendrank Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. legendwidth Sets the width (in px or fraction) of the legend for this trace. lighting :class:`plotly.graph_objects.volume.Lighting` instance or dict with compatible properties lightposition :class:`plotly.graph_objects.volume.Lightpositi on` instance or dict with compatible properties meta Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. metasrc Sets the source reference on Chart Studio Cloud for `meta`. name Sets the trace name. The trace name appears as the legend item and on hover. opacity Sets the opacity of the surface. Please note that in the case of using high `opacity` values for example a value greater than or equal to 0.5 on two surfaces (and 0.25 with four surfaces), an overlay of multiple transparent surfaces may not perfectly be sorted in depth by the webgl API. This behavior may be improved in the near future and is subject to change. opacityscale Sets the opacityscale. The opacityscale must be an array containing arrays mapping a normalized value to an opacity value. At minimum, a mapping for the lowest (0) and highest (1) values are required. For example, `[[0, 1], [0.5, 0.2], [1, 1]]` means that higher/lower values would have higher opacity values and those in the middle would be more transparent Alternatively, `opacityscale` may be a palette name string of the following list: 'min', 'max', 'extremes' and 'uniform'. The default is 'uniform'. reversescale Reverses the color mapping if true. If true, `cmin` will correspond to the last color in the array and `cmax` will correspond to the first color. scene Sets a reference between this trace's 3D coordinate system and a 3D scene. If "scene" (the default value), the (x,y,z) coordinates refer to `layout.scene`. If "scene2", the (x,y,z) coordinates refer to `layout.scene2`, and so on. showlegend Determines whether or not an item corresponding to this trace is shown in the legend. showscale Determines whether or not a colorbar is displayed for this trace. slices :class:`plotly.graph_objects.volume.Slices` instance or dict with compatible properties spaceframe :class:`plotly.graph_objects.volume.Spaceframe` instance or dict with compatible properties stream :class:`plotly.graph_objects.volume.Stream` instance or dict with compatible properties surface :class:`plotly.graph_objects.volume.Surface` instance or dict with compatible properties text Sets the text elements associated with the vertices. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. textsrc Sets the source reference on Chart Studio Cloud for `text`. uid Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. uirevision Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user- driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user- driven changes if you give each trace a `uid` that stays with it as it moves. value Sets the 4th dimension (value) of the vertices. valuehoverformat Sets the hover text formatting rulefor `value` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3- format/tree/v1.4.5#d3-format.By default the values are formatted using generic number format. valuesrc Sets the source reference on Chart Studio Cloud for `value`. visible Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). x Sets the X coordinates of the vertices on X axis. xhoverformat Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3- format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. xsrc Sets the source reference on Chart Studio Cloud for `x`. y Sets the Y coordinates of the vertices on Y axis. yhoverformat Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3- format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. ysrc Sets the source reference on Chart Studio Cloud for `y`. z Sets the Z coordinates of the vertices on Z axis. zhoverformat Sets the hover text formatting rulefor `z` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3- format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `zaxis.hoverformat`. zsrc Sets the source reference on Chart Studio Cloud for `z`. """, ), **kwargs, )